2.1 Package Contents
(1x) CLEAR 360 PRO Hearing Protection System
(1x) Carrying Case
(1x) AC Charging Block
(1x) USB-C Charging Cable
(1pair) Small Foam Ear Tip
(1pair) Medium Foam Ear Tip
(1pair) Large Foam Ear Tip
(1pair) Small Ear Wing
(1pair) Medium Ear Wing
(1pair) Large Ear Wing
(1pair) Replacement Wind Screen
(1x) User Manual
(1x) Safety Information & Quick Start Card
2.2 Intended Use
This device is only intended for use in noise environments in which it provides adequate hearing protection as outlined by federal, state and local standards.
Information on the hearing protection capabilities of the product and measured noise reduction rating (NRR) can be found on the included Safety Information & Quick Start Card.
It is the responsibility of the user to understand the governmental(federal, state and local)statutes and regulations that govern noise exposure, as well as the policies of any agency or facility under which exposure may occur,and to determine if this device meets those requirements.
2.3 System Overview
The CLEAR 360 PRO system provides hearing protection in loud noise environments. It will prevent dangerous sound pressure levels from entering your ears while maintaining full awareness of your surroundings. The system uses patented Bongiovi Acoustic Labs V3D™ technology to provide a natural 360° sound field for maximum safety and comfort. The system also provides an optional Bluetooth connection for essential communications (phone calls, radio comms, etc.) and utilizes the patented DPS™ audio processing technology to ensure maximum voice clarity.
2.4 Technical Data
Parameter | Unit |
Power Supply | 3.7VDC by battery or 5VDC by adapter |
Battery Capacity | 400mAh |
I/O Port Type | USB type C – (charging only) |
Bluetooth Frequency Band | 2.4GHz |
Weight | ~2.5oz / ~71g |
2.5 Product Compliance
2.5.1 Certificate of Compliance-Restriction of the use of Hazardous Substances (RoHs)
We certify that all of our products (exceptions – see list below) are compliant with the European Union Directive 2002/95/EC for the Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHs).
No Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent Chromium (Cr+6), PBB or PBDE is intentionally added to these devices. Any trace impurities of these substances contained in the parts are below the RoHs specified threshold levels.
To the best of our knowledge, all information provided in this certificate of Compliance is accurate as of the date this Certificate was issued.
2.5.2 Certificate of Compliance-Registration, Evaluation, Authorization and Restriction of Chemicals (REACh)
We declare that all of the products are compliant with European Directive EC1907/206 for the Registration, Evaluation, Authorization and Restriction of chemicals (REACh), and contain none or less than 0.1% of the chemicals listed as hazardous chemicals in the REACh regulation. To the best of our knowledge, all information provided in this certificate of Compliance is accurate as of the date this Certificate was issued.
2.5.3 FCC Statement
FCC ID: 2AXCP-CLEAR360PRO
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2.5.4 IC Statement
IC: 26411-CLEAR360
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science,and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference
(2)This device must accept any interference, including interference that may cause undesired operation of the device.
2.6 Product Elements


2.7 Explanation of the Function Indicator LED
LED Signal | Meaning |
WHITE light flashes three times | Device Powering On |
RED light flashes two times | Device Powering Off |
Alternate flashes of RED and BLUE | Device in Bluetooth Pairing Mode (only on Bluetooth enabled models) |
BLUE light flashes every two seconds | Device in standard operation without active Bluetooth connection (only on Bluetooth enabled models) |
BLUE light flashes every five seconds | Device in standard operation with active Bluetooth connection (only on Bluetooth enabled models) |
RED light flashes every two seconds | Listening Audio muted |
RED light flashes every three seconds | Battery Charge is low |
(When Battery Check is initiated) – RED light flashes four times | 50% – 100% Battery remaining |
(When Battery Check is initiated) – RED light flashes three times | 30% – 50% Battery remaining |
(When Battery Check is initiated) – RED light flashes two times | 10% – 30% Battery remaining |
(When Battery Check is initiated) – RED light flashes once | 0% – 10% Battery remaining |
2.8 Explanation of the Battery Status LED
LED Signal | Meaning |
Solid RED light when device is plugged in for charging | Device is charging |
NO light when device is plugged in for charging | Device is fully charged |
2.9 Explanation of Voice Prompts
For information on the 4 Listening Modes referenced below, please see the Safety Information & Quick Start Card.
Voice Prompt | Meaning |
“Power On” | Device Powering On |
“Power Off in 3… 2… 1” | Device Powering Off |
“Bluetooth Pairing” | Device in Bluetooth Pairing Mode (only on Bluetooth enabled models) |
“Connected” | Bluetooth connection is Active (only on Bluetooth enabled models) |
“Disconnected” | Bluetooth connection is Lost (only on Bluetooth enabled models) |
“Listening Mode 1” | Listening Audio changed to Mode 1 |
“Listening Mode 2” | Listening Audio changed to Mode 2 |
“Listening Mode 3” | Listening Audio changed to Mode 3 |
“Listening Mode 4” | Listening Audio changed to Mode 4 |
“Listening Audio Muted” | Listening Audio is muted |
“More Than 8 Hours Remaining” | 50% – 100% Battery remaining |
“Less Than 8 Hours Remaining” | 30% – 50% Battery remaining |
“Battery Charge Low” | 10% – 30% Battery remaining |
“Battery Charge Critical” | 0% – 10% Battery remaining |